• In saldo!
  • -20%
K&K Sound - Banjo Twin Pickup
  • K&K Sound - Banjo Twin Pickup
  • K&K Sound - Banjo Twin Tonabnehmer

K&K Sound - Banjo Twin Pickup

114,80 €
91,84 € Risparmia 20%
Tasse incluse

Il sistema pickup Banjo Twin è stato progettato per riprodurre il suono vero banjo con qualità del suono molto naturale e con scarso effetto sul tono acustico.



Spese di trasporto



The Banjo Twin Pickup System is designed to reproduce the true banjo sound with very natural tone quality and with very little effect on the acoustic tone.

The Banjo Twin works well in passive mode, especially if acoustic amps are used. 
If a preamp should be necessary, we recommend our Pure Preamp.

Installing the Banjo TwinThe Banjo Twin does not require any alteration of your valuable instrument; all the components are installed with special double side tape or self adhesive fasteners. These will not harm the finish of your instrument and residues can be removed with WD-40.
The two Pickups are installed on the inside of the banjo head using a special removable self-adhesive fastening System, specially designed for the installation on the banjo head. This adhesive is installed to the two outer edges of the Pickups only. We call this the "Catamaran" mounting technique. Using this technique, the center portion of the Pickup is free-floating, enhancing response while reducing the adhesive surface by about 40% and therefore having only very little effect on the acoustic sound.
The Banjo Twin System is equipped with a multi-use endpin jack. This jack can be mounted three ways: on the outside of the banjo (see photo), or mounted with internal drill through installation, or installed in a slot of the outer rim. For the external-mount, the jack is attached with K&K's self-adhesive dual-lock System (similar to Velcro but much stronger). It can be indefinitely opened and closed without wear and tear and guarantees super holding power with absolutely no mechanical noise. This way, the jack can be temporarily removed to fit your instrument into a form-case.

Technical Information:
Cable length: 10"
Pickup size: 27mm diameter
Impedance: High ohmic
Jack: Stereo TRSS endpin jack wired mono

No batteries required: The output level of this passive Pickup is enough to be processed directly from the mixer or amplifier.

Extensions of the System

[»] show/hide

What else?

Here you will find reviews and customer reviews directly on the manufacturers website. On request we can also provide a test of the "Akustik Gitarre" in German.

Click here to be a great help / FAQ file open (in English) about the K & K products.

Under the "Download" tab you will find the installation instructions in English.
We gladly provide you with a German installation instructions according to EU standard available.

Listen to sound samples on the manufacturer's website at.

On YouTube you can find more sound samples, and installation instructions .

K & K Pickups are RoHS compliant. Piezoceramic is officially excluded.In the manufacture of ceramics, lead is used as it unfortunately currently there is no functional substitute. The lead is incorporated in the ceramic, and is sealed on both sides by a silver electrode. The ceramics is mounted on a solid brass plate. From above it is provided with a plastic seal, so that the lead is so hermetically sealed completely and makes contact with the skin makes it impossible. Damage to the Pickup, because you could come in contact with lead. We are WEEE conform and wear exclusively for K & K products throughout Europe, the responsibility of WEEE.


Scheda tecnica

Tipo del pickup:
Pure Transducer
non necessario
Controllo volume:
non disponibile
Phase switch:
non disponibile
Folk-Instrumente (Banjo, Mandoline, Saz etc.)
Anschluss an einen Akustikgitarrenverstärker, Mischpult, Vorverstärker oder DI-Box.
Klinke, 6,35 mm Stereo, Verdrahtung in Reihenfolge der Größe der Lötfahnen: Tonabnehmer / (optionaler) 2. Tonabnehmer / optionale Stromversorgung (nicht erforderlich) / Masse des Tonabnehmers