K&K Sound - Quantum Trinity Classic

The Pure Classic System works with four Pickups (transducers) that are stuck under the bridge plate.
This eliminates an adaptation of the saddle, which saves a lot of work and fine tuning.
Besides, this is better for the sound of the guitar, because the strings the ceiling directly, without bringing additional disruption, to vibrate. So the natural, authentic and full sound of the wood is transferred, without the harsh and sterile metallic sound of a conventional Piezo Pickup. What you hear is your guitar: the individual sound of your instrument and your playing style. Each of the transducer is for a pair of strings (EA, DG, BE) to produce a balanced sound and no string is extremely loud or soft. Being close to the bridge keeps the percussive sound of the strings in the sound and get the feedback sensitivity low.

If you would like more information about this Pickup, call this product directly to our shop.

The Trinity is attached with Velcro holder in the body and has a gooseneck, the one to facilitate optimal positioning and the resulting therefrom sound variations. If you would like more information about this Pickup, call this product directly to our shop. If you would like more information about this Pickup, call this product directly to our shop.

The Trinity Microphone features an integrated 5" gooseneck (allowing it to be positioned in a number of ways, incuding outside the soundhole) and 20-20,000 Hz frequency range.

Technical Information for the Trinity Microphone:

Frequency range mic: 20 - 20,000 Hz
Sensitivity mic: 8 mV / PA / 1 kHz
Maximum SPL mic: 133dB
Polar Pattern: Soft cardioid
Power Requirement: 1.5 - 9 volt

The Quantum Blender is a two-channel preamp/mixer but this unit goes one step further.
Two fully independent channels feature special tailored powerful 3-band EQ, phase reverse switches, gain and volume controls.
Mixed output options in both active-balanced and 1/4" line-level format, individual outputs, stereo and mono inputs, and effect loop. Channel one is switchable from mic to Pickup impedance.
All this, plus K&K's ultra low noise circuitry.
The Quantum Blender allows for mixing a piezo transducer with a microphone, magnetic Pickup or another piezo Pickup. It can be used with any "2 wire" powered lavalier type condenser mic or with a piezo or magnetic Pickup.
With an appropriate microphone impedance matching transformer a dynamic mic can be used as well.
Channel 2 is designed with K&K's Trinity System or Pure Pickup in mind, but it works well with all types of piezo transducers.

Gain: The 2 gain controls allow for adjusting the input sensitivity of each channel.
Here you can set the sensitivity of each channel to fit different Pickups, microphones or transducers.

Inputs: Stereo 1/4" line input · 2 individual mono 1/4" line inputs

Outputs: Balanced XLR Mix out (carries both channels) · Line level 1/4" Mix out (carries both channels) Individual 1/4" line outputs of channel 1 and 2

Effect Loop: The effect loop allows for connecting to an effect unit (like reverb) via a special 1/4" stereo cable with a stereo plug on one side and 2 mono 1/4 plugs on the other.

Technical Data
EQ Frequencies
Channel 1:
- Bass : 100 Hz (high pass filter) +/- 18 dB
- Midrange : 1500 Hz (band pass filter) +/- 12dB
- Treble : 8000 Hz (low pass filter) +/- 18 dB
EQ Frequencies
Channel 2:
- Bass : 100 Hz (high pass filter) +/- 15 dB
- Midrange : 1500 Hz (band pass filter) +/- 18dB
- Treble : 10 000 Hz (low pass filter) +/- 15 dB
Frequency Response:
- Channel 1: 10Hz to 35KHz.
- Channel 2: 10Hz to 35KHz.
Distortion: Less than 0.005% @ 1KHz
Signal to noise ratio: - 85dB - A weighted, referred to nominal - 20dBV input
Input Impedance:
- Channel 1
Pickup: 1 Meg Ohms.
mic: 3 Kilo Ohms.
- Channel 2 transducer: 1 Meg Ohms.
Mic Power: 9volt DC max
Power source: 12 volt DC - 700 milli amp minimum- automatic polarizing